PTS840 ESD GKP SMTR LFS

PTS840 Series Microminiature SMT Side Actuated Features/Benefits • 3.5 x 3.55 mm footprint • Front PIP leads option for Typical Applications • Nomad devices • Remote controls • Personal health diagnostics • Consumer electronics strong shear resistance • ESD pin option • Reduced footprint Tactile Switches B Specifications Electrical FUNCTION: momentary action CONTACT ARRANGEMENT: 1 make contact = SPST N.O. TERMINALS: G and front PIP types for SMT TRAVEL: 0.2mm + 0.2mm / -0.1 mm LIFE: 100,000 cycles MAXIMUM VOLTAGE: 12 VDC MAXIMUM CURRENT DC: 50 mA DIELECTRIC STRENGTH: 250 VA C (1mn) CONTACT RESISTANCE: ≤ 500 mΩ INSULATION RESISTANCE: ≥ 100 MΩ BOUNCE TIME: ≤ 10 ms Operating SMT Type Force (gf) Leads Pegs Without ground pin PTS840 GM SMTR LFS 160 PTS840 GK SMTR LFS 220 PTS840 PM SMTR LFS 160 PTS840 PK SMTR LFS 220 PTS840 GMP SMTR LFS 160 PTS840 GKP SMTR LFS 220 With ground pin PTS840 ESDGM SMTR LFS 160 PTS840 ESDGK SMTR LFS 220 PTS840 ESDPM SMTR LFS 160 PTS840 ESDPK SMTR LFS 220 PTS840 ESDGMP SMTR LFS 160 PTS840 ESDGKP SMTR LFS 220 -40/+70 -70/+80 -40/+70 -70/+80 -40/+70 -70/+80 G leads No G leads No P leads No P leads No G leads Yes G leads Yes -40/+70 -70/+80 -40/+70 -70/+80 -40/+70 -70/+80 G leads No G leads No P leads No P leads No G leads Yes G leads Yes Environmental OPERATING TEMPERATURE: -40˚C to 85˚C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC61760-1 Packaging In reels of 3,500 pieces Dimensions of reels according to EIA 481B External diameter 330 mm NOTE: • Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. • The PTS series is not certified for using in Automotive application and no PPAP. However, in the case of some automotive accessories and specific applications for 2 and 3 wheeled vehicles the PTS is widely used and very suitable. Please contact your local C&K representative to discuss your application and the best switch solution. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. P T S 8 4 S M T 0 ESD Pin VOID No ESD Yes R L F S LFS RoHS, silver plated SMT Style G Gullwing P Front PIP Actuation Force M 160 gf K 220 gf Packaging SMTR Tape & reel Pegs* P with pegs Void no pegs * Peg option not valid for P SMT leads type Design Recommendations - “P” leads are recommended for applications where shear resistance is of importance - When a precise alignment between application button and the switch is requested, version with pegs are the right choice to limit the possible floating of the switch during solderability. Dimensions are shown: mm Specifications and dimensions subject to change 14 Nov 22 B–52 www.ckswitches.com PTS840 Series Microminiature SMT Side Actuated Standard G SMT Leads with ESD and Peg options 5 2 3 4 1,35 1 0,5 This ground pin is for ESD function only and not solderable Ground terminal can 0±0,05 be effective even if not soldered 5±0,1 2,5±0,1 0,4±0,1 1,8±0,1 4 3 1 2 3 4 2x 1 +0,2 0,7 -0,1 RECOMMENDED PCB LAYOUT 20 0,05 Scale Max 0,1 Max 1,7 1,45±0,1 1,95±0,1 2,2±0,1 1,1±0,1 2 1,5±0,1 3,55 2,9 1 SCHEMATIC 1,8±0,05 4,7 3,5 0,5 5 0,6 0,5 0,2 PCB MOUNTING FACE B P SMT Leads with ESD option SCHEMATIC 5 4 This ground pin is for ESD function only and not solderable 1 0±0,05 4 1 0,6 0 ,1 Max 1,7 0 ,5 ± 0,1 3 Ground terminal can be effective even if not soldered 2 ,5 ± 0,1 0 ,4 ± 0,1 2 5,5±0,1 2,2±0,1 2 Ø 0,65 +0,1 0 Through hole metalized 1,1 5 1 2 1,9 5 ± 0,1 5 0 ,5 1,35 1,45 ± 0,1 3,5 0,5 0 ,6 0, 2 2 ,9 1 ,5 ± 0,1 3 3,9±0,15 4,7 3, 55 2 4 3 4,05±0,1 0 ,8 ± 0 ,1 PCB MOUNTING FACE 1 0 ,0 5 Max RECOMMENDED PCB LAYOUT Dimensions Dimensions are shown: mm are shown: mm Specifications Specifications and and dimensions dimensions subject subject to change to change 14 Nov 22 B–53 www.ckswitches.com www.ckswitches.com Tactile Switches 0 0,65 -0,1 PTS840 Series Microminiature SMT Side Actuated TAPE & REEL 4 1,5 1 ,7 5 2 5 ,5 CARRIER TAPE 1 2 ± 0 ,3 9 ,3 C o v e r ta p e Tactile Switches B 8 18,4 Max 12,4+2 0 330 13± 0,5 2±0,5 21± 0,8 VOIR DETAIL A DETAIL A SCALE 0,5 REEL Dimensions are shown: mm Specifications and dimensions subject to change 14 Nov 22 B–54 www.ckswitches.com